What to Do When a Screw Comes Out of Your One-Piece Garage Door?

Understanding One-Piece Garage Doors

A one-piece garage door is typically supported by two large hinges, located on the left and right sides. These hinges are designed to hold an immense amount of weight, thanks to their robust structure and the extension springs tied to them. Each hinge is secured by a minimum of three substantial screws, commonly ranging from 6 to 8 inches in length. These screws need to penetrate deep into the door jamb to provide stability and support for the door’s weight.

Assessing the Situation

When a screw comes undone from the wall, it can create a precarious situation. It’s crucial to recognize that attempting to open or close the door is unwise under these circumstances. A garage door technician should be contacted immediately to address this issue. Attempting to fix it on your own can result in further complications and potential danger.

The Risks of a Loose Screw

If a screw has come loose, it often suggests that the hole has become stripped, making it impossible for the screw to securely anchor itself back into place. This could jeopardize the entire door system, leading to serious safety risks. A technician will need to re-level the door and potentially relocate the hinges to ensure they can fasten into stable wood.

The Importance of Professional Help

Only trained garage door technicians should attempt to fix this issue. This repair typically requires at least two professionals due to the inherent risks involved with handling heavy doors. The technicians will also implement a safety kicker—a mechanism designed to keep the hinges securely attached to the wall and mitigate future risks.

Long-Term Solutions for Safety

In some instances, the garage door technician may recommend replacing the door jambs on either side of the garage door. This is particularly true if wood rot or deterioration has compromised the structural integrity of the area where the screws are anchored. Ensuring that everything is secure is vital to avoid accidents.

The Danger of Falling Doors

If you’ve noticed that your one-piece garage door has a loose screw, the potential for it to fall is significant, especially if the door is made of heavy wood. In a concerning real-life scenario, a customer experienced this very issue, leading to a costly accident when the door fell onto a parked car. Hence, it is critical to heed the advice given by garage door technicians.

Inspecting Your Garage Door

It’s wise to periodically inspect the hinges on each side of your one-piece garage door. If you find that safety features, like a safety bar or angle piece, are not present, it may be time to enlist a garage door company to install these protective measures. Investing in these safety features can provide peace of mind and protect your property and family.

Conclusion: Prioritize Safety

In summary, the safety of your garage door should never be taken lightly. Loose screws or damaged hinges can lead to dangerous circumstances. Always prioritize hiring a professional when dealing with such issues, as their expertise can prevent accidents and ensure the long-term functionality of your garage door.

Frequently Asked Questions

om good

We receive many calls involving the safety eyes preventing the garage door from closing due to the safety eyes malfunctioning or simply being out of alignment. If your garage door opens fine, but will not close using the wall console, then this could be a safety eye issue. If the opener light flashes and/or the motor makes a clicking sound, this is a warning that you have a safety eye issue. You can begin by looking at the safety eyes themselves. You should see a steady light on both of the safety eyes. If one of the lights is flashing then you may just need to simply align the eyes properly. This is done by physically moving/adjusting the safety eyes until you have both safety eyes with a solid light showing.

If both safety eyes are showing a solid light, then you may have malfunctioning safety eyes.

A simple test is to press and hold the wall console to close the door. If the garage door closes while holding the wall console button, then you probably have a safety eye issue. 

We offer a full line of commercial garage door openers to fit the needs of the customer. For smaller commercial sectional garage doors we recommend using the Liftmaster 8900W these operators are rated for 14 feet maximum height and 300lbs total weight. For rolling steel doors we recommend the 8950W for doors up to 12 feet maximum height and maximum weight of 850lbs.

For large sectional commercial doors we recommend the Liftmaster J or H. These are equipped with MyQ for automated opener control and are equipped with a soft start/stop feature.

The Liftmaster J, jackshaft opener is available in ⅓, ½, ¾ and 1 horse power. The horse power needed is based on the total square footage of the sectional door it will be installed on.

Ask a question?

If you have a questioin regarding a part , fill your details and  we will get back to you shortly.

Ask a question?

If you have a questioin regarding a part , fill your details and  we will get back to you shortly.