Can I replace the old worn-out plywood on my one piece door with nice new plywood?

Replacing wood on a one piece garage door can be kind of tricky so the best way to do it is to actually remove the door from the hinges and lay it on the driveway and replace the wood that way and then rehang the door when the work is complete. unless you are a skilled in woodworking because just the removal of the door itself can be extremely dangerous if you do not know what you are doing. If you want to replace the wood on your garage door because it is water rotten for the elements have just destroyed it and it is falling apart then if you just replace the new wood exactly the same thickness as the old wood you should be okay but if you want to get creative and adding a bunch of new wood for design and visual effect you will have to be careful because when you add weight to the door the springs will either have to be adjusted or recently replaced with a stronger spring to accommodate the extra weight.

lay new plywood or boards

The one thing you should not do is lay new plywood or boards right on top of the old without removing the old wood because then you are adding an extreme amount of weight to the door and if you are doing it yourself you will definitely have problems because you might need to go up in spring size to accommodate that much weight so hiring a garage door company that knows how to do this is the best way to go.

Garage door is the biggest!

In most cases a garage sit in the front of your home and is probably the biggest thing that you see when you look at the front of your house you might want to get a little creative in your garage door look and there are a multiple different ways you can do that you could use cedar boards all the way across and stain or finish them and they look really good and cedar is also a very light wood so it does not add too much weight to the door but it looks phenomenal when it has the right finish on it and could really do wonders for the outside look of your home. Or you didn’t do any kind of work like that make sure that you do not have a homeowners association or any laws in your community that would not let you do so because you would not want to do all that work and then have to rip it down.